Вы запросили

Авторы: Kim G.

Показаны 61−80 из 83 < предыдущая 1 2 3 4 5 следующая > Показать все
Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Kim Y.C., Lee H.B., Kim G.C., Ahmad D., Kwon Y.S.

Flux Jump Behaviors and Mechanism of MgB2 Synthesized by the Non-special Atmosphere Synthesis

Ключевые слова: MgB2, bulk, stainless steel, tubes, fabrication, flux jumps, susceptibility, magnetization, pinning, defects, experimental results

J Superconductivity Novel Magnetism, 2015, v.28, N 9, p.2663-2668

Полный текст на Sci-Hub

Дополнительная информация

Kursumovic A., Wang H., MacManus-Driscoll J.L., Lee J.H., Jo W., Moon S.H., Hong G.W., Bianchetti M., Kim G.

Strong pinning in very fast grown reactive co-evaporated GdBa2Cu3O7 coated conductors

Ключевые слова: HTS, GdBCO, coated conductors, RCE-CDR process, high rate process, pinning, phase formation, fabrication, phase composition, critical caracteristics, Jc/B curves, pinning force, critical current density, magnetic field dependence, angular dependence

APL MATERIALS, 2014, v.2, N 8, p.86103

Полный текст на Sci-Hub

Дополнительная информация

Jo W., Jin H., Kim G.

Optical imaging methods for qualification of superconducting wires

Ключевые слова: measurement technique, optical imaging, coated conductors, HTS, SmBCO, thermoelectric properties

Progress Superconductivity Cryogenics, 2014, v.16, N 4, p.21-25

Полный текст на Sci-Hub

Дополнительная информация

Kim K., Lee H., Park M., Jung S., Yu I., Kim K.L., Kim G., Kim A., Sung H.

Stator Winding Fault Influence on the Field Coil of a 10 MW Superconducting Synchronous Generator

Ключевые слова: generators, rotating machines, stators, winding configurations, HTS, fault currents, numerical analysis, modeling, design parameters

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.5200104

Полный текст на Sci-Hub

Дополнительная информация

Kim K., Lee H., Park M., Kim Y., Jung S., Yu I., Kim G., Kim A.-R., Sung H.

Practical Design of a 10 MW Superconducting Wind Power Generator Considering Weight Issue

Ключевые слова: rotating machines, wind farms application, generators, design, HTS, YBCO, coated conductors, Bi2223, tapes, numerical analysis, magnetic field distribution, design parameters, weight

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.5201805

Полный текст на Sci-Hub

Дополнительная информация

Kim S., Oh S., Park M., Ha H., Sim K., Yu I., Moon S., Kim G.

Development of high speed continuous transport critical current measurement system for long piece of HTS conductor

Ключевые слова: measurement technique, critical caracteristics, transport currents, critical current, long conductors, HTS, coated conductors, high rate process

Physica C, 2013, v.484, N 1, p.142-147

Полный текст на Sci-Hub

Дополнительная информация

Lee S., Kim S., Kim K., Park M., Jung S., Yu I., Kim G., Kim A., Sung H.

Operating Characteristics of an Insulationless HTS Magnet Under the Conduction Cooling Condition

Ключевые слова: HTS, magnets, conduction cooled systems, insulation, thermal stability, design, design parameters, REBCO, coated conductors, coils pancake, quench properties, experimental results, insulationless

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.4601504

Полный текст на Sci-Hub

Дополнительная информация

Park H., Lee S., Kim S., Kim K., Park M., Jung S., Yu I., Kim G., Kim A., Park T., Sung H.

Design and Characteristic Analysis of a 10 kW Superconducting Synchronous Generator for Wind Turbines

Ключевые слова: wind farms application, rotating machines, generators, design, design parameters, HTS, REBCO, coated conductors, coils pancake, coils racetrack, numerical analysis, voltage waveforms, flux density, distribution, converters, turbine

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.5202405

Полный текст на Sci-Hub

Дополнительная информация

Kim J., Kim K., Park M., Yu I., Kim G., Sung H.

Design and comparative analysis of 10 MW class superconducting wind power generators according to different types of superconducting wires

Ключевые слова: wind farms application, rotating machines, generators, design, comparison, wires, YBCO, REBCO, coated conductors, Bi2223, tapes, critical caracteristics, Jc/B curves, coils racetrack, magnetic field distribution, design parameters, economic analysis

Physica C, 2013, v.494, N , p.255-261

Полный текст на Sci-Hub

Дополнительная информация

Lee S., Kim K., Park M., Kim T., Yu I., Kim G., Kim N., Song E.

Comparative Analysis of 10 MW Class Geared and Gearless Type Superconducting Synchronous Generators for a Wind Power Generation System

Ключевые слова: rotating machines, wind farms application, generators, design, design parameters, modeling, magnetic field distribution, numerical analysis

IEEE Transactions Applied Superconductivity, 2012, v.22, N 3, p.5202004

Полный текст на Sci-Hub

Дополнительная информация

Lee S., Park M., Yu I.-K., Kim N., Kim G.-H., Kim K.-M., Park T.-J.

EMTDC Based Simulation of 10 MW Class Grid-Connected Superconducting Wind Turbine Generator

Ключевые слова: rotating machines, wind farms application, generators, modeling, numerical analysis, design parameters, HTS, YBCO, coated conductors, turbine

IEEE Transactions Applied Superconductivity, 2012, v.22, N 3, p.5202105

Полный текст на Sci-Hub

Дополнительная информация

Kim S.H., Kim J.M., Park S.K., Lee S.B., Kim G.Y., Ri H.

Spatial distribution of the local resistive transition and the critical current density in YBCO coated conductors using Low-temperature Scanning Laser Microscopy

Ключевые слова: HTS, YBCO, coated conductors, resistive transition, critical caracteristics, critical current density, local distribution, measurement technique

Cryogenics, 2011, v.51, N 6, p.241-246

Полный текст на Sci-Hub

Дополнительная информация

Oh S.S., Jo W., Cheong H., Kim G., Park D.Y., Ha H.-.

Characterization of Co-Evaporated SmBa_2Cu_3O_7 Coated Conductors by Polarized-Raman Scattering Spectroscopy

Ключевые слова: HTS, REBCO, coated conductors, co-evaporation process, Raman spectroscopy, IBAD process, thickness dependence, critical current, microstructure, critical caracteristics

IEEE Transactions Applied Superconductivity, 2011, v.21, N 3, p.3352-3355

Полный текст на Sci-Hub

Дополнительная информация

Kiss T., Inoue M., Oh S.S., Jo W., Ha H.-S., Kim G., Matsekh A.

Current Limiting Phenomena in SmBa_2Cu_3O_7 Coated Conductors Observed by Laser-Induced Thermoelectric Imaging and Low-Temperature Laser Scanning Microscopy

Ключевые слова: current limiting characteristics, HTS, REBCO, coated conductors, thermoelectric properties, laser scanning, critical caracteristics, current-voltage characteristics, experimental results

IEEE Transactions Applied Superconductivity, 2011, v.21, N 3, p.3421-3424

Полный текст на Sci-Hub

Дополнительная информация

Watanabe K., Lee S., Cho J., Park M., Sim K.D., Kim G.H., Kim A.R., Yu I.K., Kim J.G., Won Y.J., Jeong K.W.

Power system analysis of Hanlim superconducting HVDC system using real time digital simulator

Ключевые слова: HTS, dc performance, cables, power transmission lines, high voltage process, modeling, power equipment

Physica C, 2011, v.471, N 21-22, p.1290-1294

Полный текст на Sci-Hub

Дополнительная информация

Seong K.C., Kim S., Park M., Kim G.H., Kim A.R., Yu I.K., Won Y.J.

A novel HTS SMES application in combination with a permanent magnet synchronous generator type wind power generation system

Ключевые слова: power equipment, SMES, HTS, wind farms application, modeling, design parameters

Physica C, 2011, v.471, N 21-22, p.1413-1418

Полный текст на Sci-Hub

Дополнительная информация

Jo W., Yoo S.I., Cheong H., Shin G.M., Kim G., Jeong A.R., Park D.Y.

Optimal growth conditions for GdBa2Cu3O7 thin-film coated conductors characterized by polarized Raman scattering spectroscopy

Ключевые слова: HTS, REBCO, coated conductors, fabrication, measurement technique, Raman spectroscopy

Physica C, 2010, v.470, N 20, p.1021-1024

Полный текст на Sci-Hub

Дополнительная информация

Seong K.C., Sohn M.H., Kim S.H., Park M., Sim K., Kim D.W., Kim K.M., Kim G.H., Kim A.R., Yu I.K.

Operational characteristic analysis of conduction cooling HTS SMES for Real Time Digital Simulator based power quality enhancement simulation

Ключевые слова: SMES, HTS, conduction cooled systems, model small-scale, Ac/Dc converters, hybrid systems, coils toroidal, experimental results, current leads, power equipment, quality control

Physica C, 2010, v.470, N 20, p.1695-1702

Полный текст на Sci-Hub

Дополнительная информация

Kim S., Park M., Sim K., Seong K., Yu I., Kim G., Kim A., Seo H., Otsuki Y., Tamura J.

Operating Characteristic Analysis of HTS SMES for Frequency Stabilization of Dispersed Power Generation System

Ключевые слова: power equipment, SMES, HTS, wind farms application, frequency dependence, stability, modeling

IEEE Transactions Applied Superconductivity, 2010, v.20, N 3, p.1334-1338

Полный текст на Sci-Hub

Дополнительная информация

Kim J., Kim S., Kim K., Kim D., Park M., Sim K., Seong K., Yu I., Kim G., Kim A.

Design and Manufacturing of a SMES Model Coil for Real Time Digital Simulator Based Power Quality Enhancement Simulation

Ключевые слова: power equipment, SMES, design parameters, fabrication, coils model, coils toroidal, test results, HTS, Bi2223, quality control

IEEE Transactions Applied Superconductivity, 2010, v.20, N 3, p.1339-1343

Полный текст на Sci-Hub

Дополнительная информация

Главная | Новости | Бюллетень | Конференции | Поиск публикаций в базе данных | Новое в базе данных
Российские организации | Энциклопедия | Цели сайта | Контакты | Полезные ссылки | Карта сайта | Помощь

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.